Your computer’s data is at risk. Whether you use a Mac or a PC, viruses, power surges, hackers, human error, natural disasters, hardware failures, and more are real everyday threats. To keep your data safe and sound, you will first need to back up your files on a regular basis. Secondly, when hard drive failure does occur, data recovery is the only solution.

Of course it is ideal to back up data and avoid the complicated process that is data recovery altogether, but even when you take the necessary steps to prepare for hard drive damage, you might run into problems.

Here are some procedures to follow if you experience trouble.

If a program is not functioning well on your computer, turn the computer off! This may seem a simple task, but shutting down a computer at the moment you notice your hard drive to be working overtime – perhaps you hear unusual sounds (like “cleaning”) – can prevent damage to the disk and data loss. If you let a failed hard drive run, it will eventually self-destruct. Damage to your disk is inevitable in this scenario.

If this is the case, unless you know exactly what you’re doing, don’t fix your computer yourself. Professional expertise is not a luxury in this situation – it is a must. Data recovery is a difficult and sensitive process requiring special tools and a clean environment. Not only will it be tremendously challenging to repair a hard drive on your own, but you might actually make matters worse and ensure irreversible data loss.

There is “do-it-yourself” data recovery software, but be cautious of things like this. With most computer problems of this nature, at-home instructions can be more dangerous than useful. Even if a company boasts that its products and instructions will handle your vulnerable data properly, it is important to be a skeptical consumer.

A local service provider is the average solution. Repair can happen on your own premises and you can be assured that your computer is in good hands. However, there is always the possibility that your hard drive is beyond repair – even for expert technicians – so be prepared to buy a new hard drive altogether; data recovery may not be an option any more.

How many times have you experienced that sickening feeling when your hard drive suddenly fails? How many times have you experienced that your hard disk just does not boot and all the data may be gone forever? A hard drive failure is one of the most common problems and worst nightmares faced by computer operators all over the world. Precious data is lost either at home or in big corporate environments. What can be done in these situations? Well, there are certain solutions that can be performed by you in order to revive your hard drive. We will talk about the solution later. First, let us discuss why a hard drive fails.

Whether the data on the hard drive can be recovered or not depends on the extent of the problem. A hard drive can be damaged due to firmware corruption, electronic failure, mechanical failure or a logical failure. Many times your hard drive may lose data due to the combination of the above mentioned factors. A hard drive may also develop bad sectors due to which the data on those sectors is lost or becomes unreadable.

Firmware refers to the information used by the computer to interact correctly with the hard drive. If the firmware fails or becomes corrupted, then important data on the hard drive is lost. In case of an electronic failure there maybe occur an electrical surge that can knock out the controller board on the hard drive and make it unusable. However data can be recovered by data recovery experts who use special data recovery software. Swapping the controller board with another one can prove to be dangerous as the information on the controller board is unique to the hard drive on which it is fitted. In comparison to electronic failure a mechanical failure can turn out to be worst as data recovery can almost become impossible. Mechanical failure includes head crash and also read/write head failure. Head crash can occur due to physical shock, power surges and movement of the computer. Next come the logical errors. Logical errors have nothing to do with the hardware part. Logical errors can occur due to corruption of the file system on the hard drive or improper entries in the file allocation table.

In case of hard drive failure it is vital to call the data recovery experts. In most cases, the information on the hard drive is important and you cannot bear to lose it. The experts enhance the possibilities of hard drive recovery in the case of failure of hard drive due to software malfunction, virus attacks and other reasons mentioned above. Data can be recovered on any type of operating system including all versions of Windows as well as Apple Macintosh, Novell, Linux, Unix and also on all types of file systems like FAT, FAT32, NTFS, NTFS5, HFS, HFS+, NWFS, EXT2 and EXT3. The experts may take the hard drive to their workshop in order to recover the lost data and then return it to you in a few days. Most of the data recovery experts have their own laboratories that are involved in testing the hard drives and repairing them.

Loss of data is the last thing that you as the customer would ever want. This is where the data recovery experts come into the picture. They cannot extract only data from hard drives, but recover data also from tape drives, cds, dvds and other important storage media. You as the consumer can take up some preventive measures like backing up all your important data at least once a week. Windows has its own feature rich backup program. There are other backup software programs available in the market that can avert a possible disaster.

Besides the concern of recovering your data, another problem is the time it may take for an expert to help. This can be a slow and tedious process. I recommend having a second complete computer source such as a laptop (for portability) that you can continue your work. This way you are never completely down and you can share important data between the two.

Even though the hard drive stores data, it isn’t perfect by any means. Hard drive failure is very common with all computers, with no real way to prevent it. Although there are several different reasons why a hard drive can fail, the most common is overheating. Viruses and crashes are common as well, along with theft and accidental deletion.

With the older style and mechanics of hard drives, the RPM speed was low, meaning that the drives wouldn’t overheat. The hard drives we use now days, have speeds between 7,200 and 10,000 RPM, meaning that they can get quite hot when they start working. Computers of this day and age come with fans to cool everything down, with most hard drives including temperature sensors as well, so you can keep track of just how hot your hard drive becomes.

With hard drives today, overheating is a very common problem. The faster hard drives come with speeds of 10,000 RPM, which can make the temperature soar above 70 degrees F, really heating things up inside the drive. The mechanics on the inside are built to withstand the heat, although if things become too hot, you’ll encounter problems. If a drive becomes too hot and ends up losing the data, it may be next to impossible to retrieve the information - no matter how good your data recovery specialists may be.

One area that suffers from the drive overheating is the platters, which are magnetic media. Platters are what carry the data throughout the hard drive. Platters are constructed from optical glass, aluminum, or ceramic and normally coated with a layer of magnetic material. Once the hard drive begins to heat up, the platters will start to expand, which changes their size. When this happens, the magnetic surface on the platters will get destroyed, which results in a loss of data. If the physical area of the platters are damaged, it will result in unreadable sectors.

Other areas of the hard drive that can be damaged due to overheating are the read and write heads, head actuator, and the controller chip. Hard drives are very sophisticated pieces of hardware, and can’t handle overheating. The read and write heads are a common example, as they can easily render the drive useless if they become damaged.

To prevent your hard drive from overheating, you should always make sure that it is cooled properly and well ventilated. You can always get additional fans and coolers, which will improve both ventilation and the flow of air in your computer. You can buy fans and coolers at very affordable prices, which makes them an ideal investment for keeping your hard drive or hard drives cool.

You can also get software that monitors the temperature of your hard drive as well. Whether it’s software, or additional fans, you should always ensure that your hard drives are kept cool. By keeping them cool, you’ll greatly reduce the amount of crashes. You’ll also increase the stability of your hard drive as well, which will make your entire computer perform much better.

Technology has certainly come a long way in the past few decades. Gone are the huge contraptions that used to characterize computers. Nowadays, you can easily purchase a notebook computer that weighs in at less than 6 pounds. However, one thing hasn’t changed. Hard drives still occasionally crash and frustrated users are left trying to figure out just how to do hard drive data recovery on their own.

Hard drives aren’t perfect, although they’re amazing examples of mechanical engineering. Physical damage can easily occur since these disks are spinning at such high speeds. The smallest interference while in use can cause damage in certain areas. Various features have been put into place to reduce the likelihood of a critical hard drive failure, but these are not 100% effective. Sadly, physical damage isn’t the only reason why you may need to attempt hard drive data recovery. Many people accidentally wipe out their hard drives because they’re not sure what they’re doing.

If you do know a good deal about computers, and are not the one who messed up the hard drive in the first place, it may be possible for you to do your own hard drive data recovery. Keep in mind that to do this, you may need to fix your master boot record, or retrieve data from a physically damaged disk. If you can’t do this, then you’ll need to employ the services of a hard drive data recovery expert. Actually, if your system crashes and you don’t actually recover data for a living, I’d suggest you go straight to a hard drive data recovery expert. One thing though…they’re expensive. Come on, these guys are specialized in what they do. You didn’t really expect that any hard drive data recovery expert would do it for free, did you?

You know what can really help you save money if your hard drive does crash? Backing up your data. It seems like such a sensible thing to do, doesn’t it? Some users partition their hard drive. This makes it easy for you to do your hard drive data recovery because chances are only one partition will fail. If you’ve backed up your files, you can continue working or, better yet, you can save them to an external source and get a new hard drive. You should definitely invest in an external back up. Yes, it’s an inconvenience to remember to back up important files, but at least you won’t have to pay for a hard drive data recovery expert.

Flash memory gets its name due to its microchip arrangement in such a way, that its section of memory cells gets erased in a single action or “Flash”.

Both NOR and NAND Flash memory were invented by Dr. Fujio Masuoka from Toshiba in 1984.The name ‘Flash’ was suggested because the erasure process of the memory contents reminds a flash of a camera, and it’s name was coined to express how much faster it could be erased “in a flash”. Dr. Masuoka presented the invention at the International Electron Devices Meeting (IEDM) held in San Jose, California in 1984 and Intel recognizes the potentiality of the invention and introduced the first commercial NOR type flash chip in 1988, with long erase and write times.

Flash memory is a form of non-volatile memory that can be electrically erased and rewrite, which means that it does not need power to maintain the data stored in the chip. In addition, flash memory offers fast read access times and better shock resistance than hard disks. These characteristics explain the popularity of flash memory for applications such as storage on battery-powered devices.

Flash memory is advance from of EEPROM (Electrically-Erasable Programmable Read-Only Memory) that allows multiple memory locations to be erased or written in one programming operation. Unlike an EPROM (Electrically Programmable Read-Only Memory) an EEPROM can be programmed and erased multiple times electrically. Normal EEPROM only allows one location at a time to be erased or written, meaning that flash can operate at higher effective speeds when the systems using; it read and write to different locations at the same time.

Referring to the type of logic gate used in each storage cell, Flash memory is built in two varieties and named as, NOR flash and NAND flash.

Flash memory stores one bit of information in an array of transistors, called “cells”, however recent flash memory devices referred as multi-level cell devices, can store more than 1 bit per cell depending on amount of electrons placed on the Floating Gate of a cell. NOR flash cell looks similar to semiconductor device like transistors, but it has two gates. First one is the control gate (CG) and the second one is a floating gate (FG) that is shield or insulated all around by an oxide layer. Because the FG is secluded by its shield oxide layer, electrons placed on it get trapped and data is stored within. On the other hand NAND Flash uses tunnel injection for writing and tunnel release for erasing.

NOR flash that was developed by Intel in 1988 with unique feature of long erase and write times and its endurance of erase cycles ranges from 10,000 to 100,000 makes it suitable for storage of program code that needs to be infrequently updated, like in digital camera and PDAs. Though, later cards demand moved towards the cheaper NAND flash; NOR-based flash is hitherto the source of all the removable media.

Followed in 1989 Samsung and Toshiba form NAND flash with higher density, lower cost per bit then NOR Flash with faster erase and write times, but it only allows sequence data access, not random like NOR Flash, which makes NAND Flash suitable for mass storage device such as memory cards. SmartMedia was first NAND-based removable media and numerous others are behind like MMC, Secure Digital, xD-Picture Cards and Memory Stick. Flash memory is frequently used to hold control code such as the basic input/output system (BIOS) in a computer. When BIOS needs to be changed (rewritten), the flash memory can be written to in block rather than byte sizes, making it simple to update.

On the other hand, flash memory is not practical to random access memory (RAM) as RAM needs to be addressable at the byte (not the block) level. Thus, it is used more as a hard drive than as a RAM. Because of this particular uniqueness, it is utilized with specifically-designed file systems which extend writes over the media and deal with the long erase times of NOR flash blocks. JFFS was the first file systems, outdated by JFFS2. Then YAFFS was released in 2003, dealing specifically with NAND flash, and JFFS2 was updated to support NAND flash too. Still, in practice most follows old FAT file system for compatibility purposes.

Although it can be read or write a byte at a time in a random access fashion, limitation of flash memory is, it must be erased a “block” at a time. Starting with a freshly erased block, any byte within that block can be programmed. However, once a byte has been programmed, it cannot be changed again until the entire block is erased. In other words, flash memory (specifically NOR flash) offers random-access read and programming operations, but cannot offer random-access rewrite or erase operations.

This effect is partially offset by some chip firmware or file system drivers by counting the writes and dynamically remapping the blocks in order to spread the write operations between the sectors, or by write verification and remapping to spare sectors in case of write failure.
Due to wear and tear on the insulating oxide layer around the charge storage mechanism, all types of flash memory erode after a certain number of erase functions ranging from 100,000 to 1,000,000, but it can be read an unlimited number of times. Flash Card is easily rewritable memory and overwrites without warning with a high probability of data being overwritten and hence lost.

In spite of all these clear advantages, worse may occur due to system failure, battery failure, accidental erasure, re-format, power surges, faulty electronics and corruption caused by hardware breakdown or software malfunctions; as a result your data could be lost and damaged.

Flash Memory Data Recovery is the process of restoring data from primary storage media when it cannot be accessed normally. Flash memory data recovery is a flash memory file recovery service that restores all corrupted and deleted photographs even if a memory card was re-formatted. This can be due to physical damage or logical damage to the storage device. Data even from damage flash memory can be recovered, and more than 90% of lost data can be restored.